From The Linux Foundation

Contents 1 Ricoh FAQ 1.1 General Questions 1.1.1 In which forum should I ask Ricoh related questions? 1.1.2 Where can I find a table of working Ricoh printers? 1.1.3 How well does Ricoh support free software? 1.1.4 How does LinuxPrinting.org rate Ricoh's GNU/Linux support? 1.1.5 Does the Ricoh ... work? 1.1.6 Do the Gestetner/Infotec/Lanier/NRG/Savin/ work as well as a Regular Ricoh? 1.2 Printing Specific Questions 1.2.1 How Do I Determine if my Printer Supports Postscript / PCL XL / PCL5 ? 1.2.2 What if my Printer Model is not Listed in the Database? 1.2.3 What are UserCodes? How do I use UserCodes under Linux? 1.2.4 What is JobType "Locked Print"? How do I use it? 1.2.5 What is JobType "SamplePrint"? How do I use it? 1.2.6 What is JobType "DocServer"? How do I use it? 1.2.7 I'm using Red Hat Linux / Fedora, and the driver doesn't support all the printer features or UserCode. 1.2.8 I downloaded the Postscript driver from Linuxprinting.org, but why it's printing blank pages? 1.2.9 How do I install a PPD file? 1.2.10 Which protocol / device URI should I use? 1.2.11 Why can I not print multiple copies? 1.2.12 How do I troubleshoot printing problems / where can I find error logs? 1.2.13 I have an error code SC738, What does this mean and how do I clear the unit of it? 1.2.14 How to make my printer work under Mac OS X 1.2.15 I'm using Mac OS X with PCL-XL driver. Why Duplex doesn't work 1.2.16 Are there LAN-Fax drivers available? 1.3 Ricoh Aficio 350 1.3.1 Does the Ricoh Aficio 350 work? 1.4 Ricoh Aficio 450e 1.4.1 Does the Ricoh Aficio 450e work? 1.5 Ricoh C7006 1.5.1 Does it work?

[edit] Ricoh FAQ

[edit] General Questions

[edit] In which forum should I ask Ricoh related questions?

Ricoh Employees and partners provide support via the Open Printing forums at: Forum: [http://forums.openprinting.org/list.php?30 Printers from the Ricoh family and OEMs

You may also call your designated Ricoh Representative for support.

[edit] Where can I find a table of working Ricoh printers?

A complete list of supported Ricoh devices and corresponding PPD Files can be found at: http://www.linuxprinting.org/printer_list.cgi?make=Ricoh

[edit] How well does Ricoh support free software?

Ricoh is a well-known producer for digital copiers, high-end laser printers and multi-function devices. Their printers always understand PostScript or PCL, so you usually get them working by applying standard methods for the printer setup.

From the beginning of 2005 on, Ricoh started to publish PPD files for their printers under the MIT license and so the one got all functionality of the printers working by simply downloading and installing a PPD. Due to the free license the PPDs made it even into some Linux distributions and so under these distributions the appropriate printers simply work out-of-the-box.

And the PPDs are not simple copies of Windows or Mac PPDs, they are especially made for Linux and Unix and appropriately tested. They make use of foomatic-rip to give also support to non-PostScript models (PCL, with use of GhostScript) and for user name and password options to support features like holding confidential jobs for example.

Ricoh does not only publish PPDs for Ricoh-branded printers, but also for their partners and OEMs Gestetner, Infotec, Lanier, NRG, and Savin. So printers of these brands are as well supported.

All this is managed by George Liu from Ricoh, who also helps users on the linuxprinting.org forums. He also organized, together with Hitoshi Sekine, also from Ricoh, the financiation of the presence of Till Kamppeter, Kurt Pfeifle (KDE Print and Samba Printing documentation), and Cristian Tibirna (KDE Print maintainer) on the linuxprinting.org booth on the LinuxWorld Expo in San Francisco in August 2005.

Also Ulrich Wehner from Ricoh's host printing team works on the Linux/Unix support of these printers and answers many questions on the linuxprinting.org forums.

[edit] How does LinuxPrinting.org rate Ricoh's GNU/Linux support?

See the Vendor ScoreCard.

[edit] Does the Ricoh ... work?

Fundamentally all Ricoh devices that support PCL XL or PostScript should work, Not all Ricoh Devices support these Print Languages. Please consult your device specification. A quick check of supported languages can be made by printing the device configuration page.

If the device does support PCL-XL (PCL6) or PS your first step should be to look up your printer on linuxprinting.org. If it is listed, download the PostScript or PCL-XL PPD file (depending if you have the PostScript add-on installed or not) and set up your print queue with it. Note that you will need a recent foomatic-rip from linuxprinting.org (also for PostScript) and GhostScript in case of a PCL-XL printer.

If your printer is not listed on Linuxprinting.org, look for a PS PPD file on the printer's driver CD (PostScript printers only). You may also have success with a PPD file designed for an earlier version of the same device. Finally, you can use the "Generic PostScript printer" or "Generic PCL-6/XL printer" PPD's on linuxprinting.org.

If you have any questions or concerns about which PPD to use for your device please post you question to the linuxprinting.org support forums, often Ricoh can provide a pre-release PPD file for your use, often before they are published to Linuxprinting.org.

[edit] Do the Gestetner/Infotec/Lanier/NRG/Savin/ work as well as a Regular Ricoh?

I single device can exist with multiple brand names. A specific model will function equally well regardless of the brand. The only technical difference is the sticker on the front and the name of the device.

For information about supported devices by Ricoh, see above.

[edit] Printing Specific Questions

[edit] How Do I Determine if my Printer Supports Postscript / PCL XL / PCL5 ?

For most Ricoh printers, supported printer languages are listed on the printer configuration page.

To print out configuration page:

• If your machine has a scanner with a control panel, push "User Tools / Counter" button, then click "Printer Features", and select "Config. Page".
• If your machine is a printer, push "Menu", then "List/Test Print" and select "Config. Page".

"Printer Language" is listed in the top section (System Reference) of the configuration page.

[edit] What if my Printer Model is not Listed in the Database?

Also See FAQ "Does the Ricoh ... work?"

1. If your printer supports Postscript 3, you can download and extract the .PPD files from Windows XP driver.

2. If your printer supports Postscript, use Generic PostScript driver.

3. If your printer supports PCL-XL, use Generic PCL6/PCL XL driver.

4. If your printer supports PCL 5c, use Generic PCL 5c driver

5. If your printer supports PCL 5e, use Generic PCL 5e driver.

6. If the printer feature you need is not supported by Generic driver, post a question on Ricoh family forum

[edit] What are UserCodes? How do I use UserCodes under Linux?

UserCodes in the Ricoh sense allow the user to send a job to the printer and have the printer track the print to a specific device configured code. These codes are configured in the printer in advance.

In some environments, printers are configured in a way that forces the user to send jobs with UserCodes or they cannot print. This is designed to allow the tracking of printed documents. This if often the case on Color and Black / White combination devices, where they want to allow Black / White printing, but track Color. If the printer is set to restrict based on user codes, and you send it a job without one, the printer will discard the job, with "Authentication Error"

There are three approaches to specify a UserCode.

• Hard code UserCode in the driver PPD file.
  Three sample user codes (1001, 1002 and 1003) are built into each PPD file. To replace a sample user code with your own, you can edit the PPD file manually, or run a simple shell command. > cat ricohppdfile.ppd | sed "s/1001/1234/g" > newricohppdfile.ppd This command replaces user code "1001" with "1234" and generates new PPD file newricohppdfile.ppd. You can then create printer queue with the generated PPD file.

• Use the option on the print command. -o UserCode=xxxx

• Install and use a GUI program http://cups.sourceforge.net/xpp/
  XPP behaves like kprinter, with type-in value support. > xpp filename. Unfortunately, very few distribution provides install packages for XPP. Most likely you need to compile from source:(

UserCode can be used in conjunction with JobType=LockedPrint/SamplePrint/DocServer. If you do not plan to use those features, leave JobType=Normal, LockedPrintPassword=None and DocServerPassword=None.

You MUST also install the latest foomatic-rip if you are using PCL-XL (pxlmono) driver, and your dirstribution is older than RHEL 5, SLED/S 11, Fedora Core 5, SUSE professional 10.2, Mandriva 2006.

To install the latest foomatic-rip, follow step 4 on http://www.linuxprinting.org/cups-doc.html

[edit] What is JobType "Locked Print"? How do I use it?

Locked Print jobs are print jobs that are submitted with a password. The printer will not print the job until operator releases it from the printer control panel. Locked Print differs from User Codes, by not printing the job until the user enters the password. User codes do not wait for user intervention for a print job with valid code. User codes can be used in conjunction with Locked Print.

To use the LockedPrint feature, select JobType=LockedPrint, and provide LockedPrintPassword.
DocServerPassword must be set to None (if applicable)

There are three approaches to specify a LockedPrintPassword.

• Hard code LockedPrintPassword in the driver PPD file.
  Three sample locked print passwords (4001, 4002 and 4003) are built into each PPD file. To replace a sample locked print password with your own, you can edit the PPD file manually, or run a simple shell command. > cat ricohppdfile.ppd | sed "s/4001/1234/g" > newricohppdfile.ppd This command replaces locked print password "4001" with "1234" and generates new PPD file newricohppdfile.ppd. You can then create printer queue with the generated PPD file.

• Use command line. -o JobType=LockedPrint -o LockedPrintPassword=xxxx

• Install and use a GUI program http://cups.sourceforge.net/xpp/
  XPP behaves like kprinter, with type-in value support. > xpp filename. Unfortunately, very few distribution provides install packages for XPP. Most likely you need to compile from source:(

You need to install the latest foomatic-rip if you are using dirstributions older than RHEL 5, SLED/S 11, Fedora Core 5, SUSE professional 10.2, Mandriva 2006.

To install the latest foomatic-rip, follow step 4 on http://www.linuxprinting.org/cups-doc.html

[edit] What is JobType "SamplePrint"? How do I use it?

SamplePrint will print one copy of the submitted job and stores the job in the printer. You can walk up to the printer, proof reading the printout and specify additional copies from control panel. SamplePrint does not require a password. SamplePrint can be used in conjunction with User code.

To use SamplePrint feature, select JobType=SamplePrint, and leave LockedPrintPassword=None, DocServerPassword=None. (if applicable)

You need to install the latest foomatic-rip if you are using dirstributions older than RHEL 5, SLED/S 11, Fedora Core 5, SUSE professional 10.2, Mandriva 2006.

To install the latest foomatic-rip, follow step 4 on http://www.linuxprinting.org/cups-doc.html

[edit] What is JobType "DocServer"? How do I use it?

A print job with JobType=DocServer will be stored in the printer. User can later walk up to the printer and release the job with a password.
The difference between LockedPrint and DocServer is that the DocServer job will remain in the printer after printing vs LockedPrint job will be deleted automatically after printing.

To use DocServer feature, select JobType=DocServer, and provide a DocServerPassword. LockedPrintPassword must be set to None

There're three approaches to specify DocServerPassword.

• Hard code DocServerPassword in the driver PPD file.
  Three sample doc server passwords (3001, 3002 and 3003) are built into each PPD file. To replace a sample doc server password with your own, you can edit the PPD file manually, or run a simple shell command. > cat ricohppdfile.ppd | sed "s/3001/1234/g" > newricohppdfile.ppd This command replaces doc server password "3001" with "1234" and generates new PPD file newricohppdfile.ppd You can then create printer queue with the generated PPD file.

• Use command line. -o JobType=DocServer -o DocServerPassword=xxxx

• Install and use a GUI program http://cups.sourceforge.net/xpp/
  XPP behaves like kprinter, with type-in value support. > xpp filename. Unfortunately, very few distribution provides install packages for XPP. Most likely you need to compile from source:(

You also need to install the latest foomatic-rip if you are using dirstributions older than RHEL 5, SLED/S 11, Fedora Core 5, SUSE professional 10.2, Mandriva 2006.

To install the latest foomatic-rip, follow step 4 on http://www.linuxprinting.org/cups-doc.html

[edit] I'm using Red Hat Linux / Fedora, and the driver doesn't support all the printer features or UserCode.

Do not use the Red Hat printer configuration tool for versions older than Fedora Core 6 / Red Hat Enterprise 5.
Follow steps here to install printer

[edit] I downloaded the Postscript driver from Linuxprinting.org, but why it's printing blank pages?

Your printer does not support Postscript. Try PCL-XL driver or post questions here: http://forums.openprinting.org/list.php?30

[edit] How do I install a PPD file?

Use command line or CUPS web interface.

• Command line installation.
  > su
  # /usr/sbin/lpadmin -p replace_with_printer_name -E -v socket://replace_with_printer_ipaddress:9100 -P replace_with_ppd_name

• CUPS web interface.
  Open http://127.0.0.1:631/printers from your browser, click "Add Printer" and follow the steps.

We do not recommend/support distribution's own printer config tools. Beware of the bug in system-config-printer

[edit] Which protocol / device URI should I use?

• Generally socket://printeripaddress:9100 would work.
• http://printeripaddress:631/printer would work on newer printers.

[edit] Why can I not print multiple copies?

• The pxlmono(PXL) driver does not support multiple copies. You need to enable collate option in the printing dialog. If you are using command line, use "-o collate=true".

[edit] How do I troubleshoot printing problems / where can I find error logs?

• Check /var/log/cups/error_log.
  Usully "LogLevel info" is sufficient. LogLevel Debug has too much information and too difficult to dig through.

• How to change debug level? Edit /etc/cups/cupsd.conf and restart CUPS(usually with # /etc/init.d/cups restart)

• Check /tmp/foomatic-rip.log.
  Change "my $debug = 0" to "my $debug = 1" in foomatic-rip to enable logging.
  # vi /usr/lib/cups/filter/foomatic-rip (or # vi /usr/lib64/cups/filter/foomatic-rip on some 64-bit systems)

• Check print spool file Set "FileDevice Yes" in /etc/cups/cupsd.conf
  Restart CUPS
  # /etc/init.d/cups restart Create a queue with Device URI "file:/tmp/myspoolfile.rip"
  Print your job, check /tmp/myspoolfile.rip
  

[edit] I have an error code SC738, What does this mean and how do I clear the unit of it?

Most likely a SC (service call) code is resulted from a hardware problem. You need to call service. For example:

• SC692 - CDIC GAVD Block I2C Bus Error/Communication Error Between Engine/Board & Print Controller
• SC76 - Belt sensor error
• SC305 - PCU-side quenching lamp has come loose from bracket
• SC738 - finisher lift motor home position sensor error. Either the sensor is broken, or your finisher shift tray is pushed up too high.

[edit] How to make my printer work under Mac OS X

• If your printer supports Postscript, you should download the full-featured Mac OS X driver from Ricoh website. It supports Mac OS 8, 9, 10.x. UserCode feature, however, is only supported by the Mac OS X driver for the latest models (machine released in 2007 or so). If you have an older printer, you can safely use the driver for its successor model. (Just need to make sure not to mix B/W models with Color models. Printer will not be damaged, the worst could happen is you cannot control the finishers or extra paper trays.)
• If your printer supports PCL-XL, you should follow the instructions for pxlmono for Mac OS X. It includes the installation packages for PPD files, foomatic-rip and Ghostscript. To support UserCode, you need to use text editor to edit the PPD file (either from pxlmonoo Mac package or download directly from this website) and search and replace one of the sample user codes (1001, 1002 or 1003) with your own. You can then install the PPD file using printer setup tool on Mac OS X.
• if your printer only supports PCL5, you have to use the Generic PCL 5 driver from this site. You must also follow these instructions to install HPIJS, foomatic-rip and Ghostscript. If you want to use user code feature, search and post on the forum for help.

[edit] I'm using Mac OS X with PCL-XL driver. Why Duplex doesn't work

That is a bug. http://forums.freestandards.org/read.php?34,1386. There're two approaches to fix it, whatever sounds easier to you.

• Download and install the latest version of foomatic-rip package.
• Download the latest PCL-XL driver again, they were updated on Dec 17, 2007, which includes a workaround for that problem.

[edit] Are there LAN-Fax drivers available?

You can post your request for Mac OS X LAN Fax drivers in the forum.

[edit] Ricoh Aficio 350

[edit] Does the Ricoh Aficio 350 work?

This printer should work. Use the Ricoh supplied PPD from the included CD-ROM.

[edit] Ricoh Aficio 450e

[edit] Does the Ricoh Aficio 450e work?

This printer has been confirmed working. Use the Ricoh supplied PPD from the included CD-ROM.

[edit] Ricoh C7006

[edit] Does it work?

This model is probably PostScript. Look for the PPD file on the printer's Windows/Mac CDs or on Ricoh's web site and proceed as shown on PPDDocumentation

The printer's manual or self test page would probably tell you which languages this printer understands. If it's only some PCL 5 thingy you should use the HPIJS 1.3 driver (Generic PCL 5c printer in the Foomatic database), in case of PCL 6 or XL try the pxlcolor GhostScript driver (Generic PCL 6/XL printer).

Please report your results according to http://www.linuxprinting.org/contribute.html#data

so that we can make an entry for this printer.